一、产品介绍：
I. Product introduction:
改性硅酮
密封胶是高模量，高强度的硅酮
结构密封胶，在结构装配应用中对许多基材都表现出优秀的粘合力。它具有的产品特性如下： 中性固化，对金属、
镀膜玻璃、混疑土及
大理石无腐蚀腐蚀性； 良好的耐候性和耐老化性能；良好的热稳定性，适用温度范围在—40℃到150℃； 对大部分建筑材料具有优良的相容性，一般无需使用底涂； 与其它中性
硅酮胶具有良好的相容性。
Modified silicone sealant is a high modulus and high strength silicone structural sealant, which shows excellent adhesion to many substrates in structural assembly applications. Its product characteristics are as follows: neutral curing, non-corrosive to metals, coated glass, doubtful soil and marble; good weatherability and aging resistance; good thermal stability, applicable temperature range from - 40 to 150 degrees C; good compatibility for most building materials, generally without the use of undercoat; good compatibility with other neutral silicone gels Sex.
二、主要用途：
II. Main uses:
玻璃
幕墙、石材（大理石、
花岗岩幕墙）、
铝板幕墙，玻璃采光顶及金属结构工程的结构粘结密封；
中空玻璃二道粘结密封； 高层建筑和工业应用中的密封和粘结； 其它各类建筑及工业密封。
Glass curtain wall, stone (marble, granite curtain wall), aluminium plate curtain wall, glass lighting roof and metal structure engineering structural bonding seal; hollow glass two-way bonding seal; high-rise buildings and industrial applications of the sealing and bonding; other types of building and industrial seals.
三、使用限制：
3. Use restrictions:
不能用于所有会渗出脂油，增塑剂或溶剂的材料，如浸油
木材的表面； 不能用于通风条件不佳的场所； 不能用结霜、潮湿、浸水的表面； 施工时材料表面温度不能超过40℃； 不能和聚硫胶混合使用。 四、贮存期： 产品必须贮存于密闭的容器中，置于阴凉干燥处，贮存温度不大于27℃，自生产之日起开始计算，保质期为9个月。
It can not be used on all materials that leak grease, plasticizer or solvent, such as the surface of oil-impregnated wood; it can not be used in places with poor ventilation conditions; it can not be used on frosted, wet and water-impregnated surfaces; the surface temperature of materials can not exceed 40 C during construction; it can not be mixed with polysulfide glue. Storage period: The product must be stored in a seaLED container in a cool and dry place. The storage temperature is not more than 27 C. The shelf life is 9 months from the date of production.
